Base Coatings

Epoxy Screen Layer

(Product ID: SCR-XXX) 

Epoxy Screen Layer (SCR-XXX) is a two part formulation designed to be applied to surfaces using conventional paint spraying equipment to mask machining marks and stains or to mask surfaces that fluoresce and interfere with PSP or TSP data.  Epoxy Screen Layer comes in two parts and is mixed 1:1.  Epoxy Screen Layer provides the highest quality surface screen layer with superior solvent resistance and improved opacity.  The solvent resistance means PSP can be applied over it and removed many times without the need to reapply the screen layer each time.  Epoxy Screen Layer needs to be fully cured before the PSP is applied by curing at elevated temperatures (90C for ~4 hours) or by allowing a few weeks to air cure to prevent the screen layer from interacting with the PSP and compromising data.  Epoxy Screen Layer is a permanent screen layer.  It is recommended for all models but required for plastic models which are not solvent resistant.

Screen Layer  2 parts

                                  Model Painted with Epoxy Screen Layer                                                                Epoxy Screen layer in two parts, before mixing

Specifications

Shelf life: 3-months


Downloads

Epoxy Screen Layer Datasheet.pdf

Epoxy Screen Layer Painting Instructions.pdf

Epoxy Screen Layer Part A SDS.pdf

Epoxy Screen Layer Part B SDS.pdf


Available quantities: 200-ml, 400-ml, 750-ml

Surface coverage is approximately 1 square meter  per liter. 


FIB Basecoat

(Product ID: FB-XXX)

FIB Basecoat is a single application screen layer that is sprayed onto a model surface with paint spraying equipment to mask machining marks and stains or to mask surfaces that fluoresce and interfere with PSP or TSP data.  FIB Basecoat also provides a uniformly reflective surface to minimize illumination errors and enhance the emission of PSP and TSP.  This formulation is recommended for surfaces where the screen layer and PSP or TSP absolutely must be removed from the surface using common mild solvents.

Specifications

Shelf life: 12-months


Downloads

FIB Basecoat Painting Instructions.pdf

FIB Basecoat SDS.pdf


Available quantities: 200-ml, 400-ml, 750-ml

Surface coverage is approximately 1 square meter  per liter. 

For ordering information, please contact our sales department: issi-sales@innssi.com or call us at (937) 630-3012